Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: insertion pinDescription: TE Connectivity Junior Timer socket connector Junior timer plug type socket connector pre installed with plug-in contacts### TE Connectivity Junior Timer Automotive Connectors20171+$68.581410+$65.5996100+$65.0629250+$64.6454500+$63.98941000+$63.69122500+$63.27385000+$62.9160 -
![]()
Category: insertion pinDescription: TE Connectivity AMPMODU Mod II Standard 2.54mm single row covered tube socket AMPMODU Mod II 2.54mm standard covered tube socket, with black thermoplastic 94V-0 flame retardant shell, 0.64mm square column, and printed circuit board bracket. These AMPMODU Mod II 2.54mm shielded tube sockets offer right angle or vertical installation directions and various contact coating options. ###2.54mm TE Connectivity AMPMODU Mod II Series56265+$22.046350+$21.1042200+$20.5766500+$20.44471000+$20.31282500+$20.16205000+$20.06787500+$19.9736 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK printed circuit board socket connector TE Connectivity Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket designed to perform the latest glow wire test (GWT) requirements according to IEC 60335-1 and meet UL 94 V-0 requirements. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that require compliance with IEC 60335-1 and UL 94 V-0 standards. The typical applications of these universal MATE-N-LOK hot wire sockets include household appliances, desktop computers, HVAC equipment, lighting systems, security systems, industrial control, storage, and network systems. ###TE Connectivity Universal MATE-N-LOK ™ Ser314110+$6.0900100+$5.7855500+$5.58251000+$5.57242000+$5.53185000+$5.48107500+$5.440410000+$5.4201 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK printed circuit board socket connector TE Connectivity Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket designed to perform the latest glow wire test (GWT) requirements according to IEC 60335-1 and meet UL 94 V-0 requirements. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that require compliance with IEC 60335-1 and UL 94 V-0 standards. The typical applications of these universal MATE-N-LOK hot wire sockets include household appliances, desktop computers, HVAC equipment, lighting systems, security systems, industrial control, storage, and network systems. ###TE Connectivity Universal MATE-N-LOK ™ Ser37305+$5.364925+$4.967550+$4.6893100+$4.5701500+$4.49062500+$4.39135000+$4.351510000+$4.2919 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK printed circuit board socket connector TE Connectivity Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket designed to perform the latest glow wire test (GWT) requirements according to IEC 60335-1 and meet UL 94 V-0 requirements. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that require compliance with IEC 60335-1 and UL 94 V-0 standards. The typical applications of these universal MATE-N-LOK hot wire sockets include household appliances, desktop computers, HVAC equipment, lighting systems, security systems, industrial control, storage, and network systems. ###TE Connectivity Universal MATE-N-LOK ™ Ser49715+$6.427425+$5.951350+$5.6180100+$5.4752500+$5.37992500+$5.26095000+$5.213310000+$5.1419 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK printed circuit board socket connector TE Connectivity Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket designed to perform the latest glow wire test (GWT) requirements according to IEC 60335-1 and meet UL 94 V-0 requirements. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that require compliance with IEC 60335-1 and UL 94 V-0 standards. The typical applications of these universal MATE-N-LOK hot wire sockets include household appliances, desktop computers, HVAC equipment, lighting systems, security systems, industrial control, storage, and network systems. ###TE Connectivity Universal MATE-N-LOK ™ Ser80775+$4.167525+$3.858850+$3.6427100+$3.5501500+$3.48832500+$3.41115000+$3.380310000+$3.3340 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK printed circuit board socket connector TE Connectivity Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket designed to perform the latest glow wire test (GWT) requirements according to IEC 60335-1 and meet UL 94 V-0 requirements. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that require compliance with IEC 60335-1 and UL 94 V-0 standards. The typical applications of these universal MATE-N-LOK hot wire sockets include household appliances, desktop computers, HVAC equipment, lighting systems, security systems, industrial control, storage, and network systems. ###TE Connectivity Universal MATE-N-LOK ™ Ser50015+$1.906225+$1.765050+$1.6662100+$1.6238500+$1.59562500+$1.56035000+$1.546110000+$1.5250 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK printed circuit board socket connector TE Connectivity Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket designed to perform the latest glow wire test (GWT) requirements according to IEC 60335-1 and meet UL 94 V-0 requirements. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that require compliance with IEC 60335-1 and UL 94 V-0 standards. The typical applications of these universal MATE-N-LOK hot wire sockets include household appliances, desktop computers, HVAC equipment, lighting systems, security systems, industrial control, storage, and network systems. ###TE Connectivity Universal MATE-N-LOK ™ Ser36495+$6.565125+$6.078850+$5.7383100+$5.5925500+$5.49522500+$5.37365000+$5.325010000+$5.2520 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK printed circuit board socket connector TE Connectivity Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket designed to perform the latest glow wire test (GWT) requirements according to IEC 60335-1 and meet UL 94 V-0 requirements. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that require compliance with IEC 60335-1 and UL 94 V-0 standards. The typical applications of these universal MATE-N-LOK hot wire sockets include household appliances, desktop computers, HVAC equipment, lighting systems, security systems, industrial control, storage, and network systems. ###TE Connectivity Universal MATE-N-LOK ™ Ser165510+$7.0500100+$6.6975500+$6.46251000+$6.45082000+$6.40385000+$6.34507500+$6.298010000+$6.2745 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK printed circuit board socket connector TE Connectivity Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket designed to perform the latest glow wire test (GWT) requirements according to IEC 60335-1 and meet UL 94 V-0 requirements. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that require compliance with IEC 60335-1 and UL 94 V-0 standards. The typical applications of these universal MATE-N-LOK hot wire sockets include household appliances, desktop computers, HVAC equipment, lighting systems, security systems, industrial control, storage, and network systems. ###TE Connectivity Universal MATE-N-LOK ™ Ser575810+$7.3200100+$6.9540500+$6.71001000+$6.69782000+$6.64905000+$6.58807500+$6.539210000+$6.5148 -
![]()
Category: insertion pinDescription: TE Connectivity The universal power module TE Connectivity universal power module hardware is designed to be compatible with Z-PACK 2mm HM, Z-PACK HS3, Z-PACK HM Zd, and Z-PACK TinMan connectors. This universal power module is a 3-position modular hard metric board to board system. ### TE Connectivity AMP Z-PACK ™ The Z-PACK 2 mm HM interconnect system is designed as a two-piece system for connecting free boards (sub boards or printed circuit boards) and fixed boards (mainboards, backboards, or rear panels), as well as for feedthrough connections through fixed boards.90221+$100.444510+$96.0773100+$95.2912250+$94.6798500+$93.71901000+$93.28232500+$92.67095000+$92.1469 -
![]()
Category: insertion pinDescription: TE Connectivity The universal power module TE Connectivity universal power module hardware is designed to be compatible with Z-PACK 2mm HM, Z-PACK HS3, Z-PACK HM Zd, and Z-PACK TinMan connectors. This universal power module is a 3-position modular hard metric board to board system. ### TE Connectivity AMP Z-PACK ™ The Z-PACK 2 mm HM interconnect system is designed as a two-piece system for connecting free boards (sub boards or printed circuit boards) and fixed boards (mainboards, backboards, or rear panels), as well as for feedthrough connections through fixed boards.60141+$68.062810+$65.1035100+$64.5708250+$64.1565500+$63.50551000+$63.20962500+$62.79535000+$62.4402 -
![]()
Category: insertion pinDescription: TE Connectivity AMP-LATCH Universal pop-up 2.54mm x 2.54mm printed circuit board pin socket connector AMP-LOCH Universal pop-up covered printed circuit board mounting pin socket has a standard profile, 2.54 x 2.54mm centerline, and latch model that can be used with AMP-LOCH ribbon cable connectors. These printed circuit boards are equipped with AMP-LOCH pin sockets for military center and dual polarization, black UL 94V-0 GF thermoplastic housing, and offer printed circuit board vertical and printed circuit board right angle mounting styles. The socket with short latch is compatible with the AMP-LWATCH ribbon cable socket connector without stress relief, while the socket with long latch is compatible with the AMP-LWATCH ribbon cable socket with stress relief. For data on different latch options and contact coatings, please refer to the attached data sheet. For stress relief parts, please refer to inventory numbers 454-2390, 454-2463, and 454-2390 (typical). For mating connectors, please refer to stock numbers 454-2413, 719-8791, and 718-9245 (typical). **Supplementary Data * * --- * * Manufacturer Part Number * * | * * Direction * * | * * Latch Type * * | * Contact Plating * * | * Solder Tail Wire Length * * x-5499910-x | Vertical Printed Circuit Board Installation | Short | Gold Plating (0.00038) | 2.79mm x-5499160-x | Vertical Printed Circuit Board Installation | Short | Gold Plating (0.00076) | 2.79mm x-5499374-x | Vertical Printed Circuit Board Installation | Short | Gold Plating (0.00076) | 3.94mm x-54999923-x | Vertical Printed Circuit Board Installation | Long | Gold Plating (0.00038) | 3.94mm x-5102321-x | Vertical Printed Circuit Board Installation | Long | Gold Plating (0.00076) | 3.94mm x-5499206-x | Vertical Printed Circuit Board Installation | Length | Gold Plating (0.00076) | 2.79mm x-5499913-x | Right Angle Printed Circuit Board Installation | Short | Gold Plating (0.00038) | 2.79mm x-5499345-x | Right Angle Printed Circuit Board Installation | Short | Gold Plating (0.00076) | 2.79mm x-5499786-x| R89925+$29.495750+$28.2352200+$27.5293500+$27.35291000+$27.17642500+$26.97475000+$26.84877500+$26.7226 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK printed circuit board socket connector TE Connectivity Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket designed to perform the latest glow wire test (GWT) requirements according to IEC 60335-1 and meet UL 94 V-0 requirements. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that require compliance with IEC 60335-1 and UL 94 V-0 standards. The typical applications of these universal MATE-N-LOK hot wire sockets include household appliances, desktop computers, HVAC equipment, lighting systems, security systems, industrial control, storage, and network systems. ###TE Connectivity Universal MATE-N-LOK ™ Ser714410+$6.3780100+$6.0591500+$5.84651000+$5.83592000+$5.79345000+$5.74027500+$5.697710000+$5.6764 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK printed circuit board socket connector TE Connectivity Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket designed to perform the latest glow wire test (GWT) requirements according to IEC 60335-1 and meet UL 94 V-0 requirements. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that require compliance with IEC 60335-1 and UL 94 V-0 standards. The typical applications of these universal MATE-N-LOK hot wire sockets include household appliances, desktop computers, HVAC equipment, lighting systems, security systems, industrial control, storage, and network systems. ###TE Connectivity Universal MATE-N-LOK ™ Ser501910+$7.5276100+$7.1512500+$6.90031000+$6.88782000+$6.83765000+$6.77487500+$6.724710000+$6.6996 -
![]()
Category: insertion pinDescription: TE Connectivity Economy Power TE Connectivity Economy Power (EP) connector 2.5 double row covered pin socket series. These 2.5 double row EP pin sockets with covers have tin plated columns, 2 or more of which are bent, and use UL 94 V-0 grade body material. The vertical EP 2.5 double row vertical socket has a printed circuit board alignment protrusion. ###TE Connectivity Economy Power (EP) Series438910+$7.3104100+$6.9449500+$6.70121000+$6.68902000+$6.64035000+$6.57947500+$6.530610000+$6.5063 -
![]()
Category: insertion pinDescription: TE Connectivity AMPMODU Mod II Standard 2.54mm single row covered tube socket AMPMODU Mod II 2.54mm standard covered tube socket, with black thermoplastic 94V-0 flame retardant shell, 0.64mm square column, and printed circuit board bracket. These AMPMODU Mod II 2.54mm shielded tube sockets offer right angle or vertical installation directions and various contact coating options. ###2.54mm TE Connectivity AMPMODU Mod II Series552110+$10.3068100+$9.7915500+$9.44791000+$9.43072000+$9.36205000+$9.27617500+$9.207410000+$9.1731 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK printed circuit board socket connector TE Connectivity Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket designed to perform the latest glow wire test (GWT) requirements according to IEC 60335-1 and meet UL 94 V-0 requirements. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that require compliance with IEC 60335-1 and UL 94 V-0 standards. The typical applications of these universal MATE-N-LOK hot wire sockets include household appliances, desktop computers, HVAC equipment, lighting systems, security systems, industrial control, storage, and network systems. ###TE Connectivity Universal MATE-N-LOK ™ Ser60275+$2.685225+$2.486350+$2.3470100+$2.2874500+$2.24762500+$2.19785000+$2.178010000+$2.1481 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK connector - printed circuit board vertical pin socket with operating pin contacts Universal MATE-N-LOK printed circuit board vertical pin socket with operating pin contacts and 6.35mm centerline. These MATE-N-LOK printed circuit board vertical plug socket connectors have 5.08mm solder posts and tin plated copper alloy contacts, rated at 19A, 600V AC. The housing of these printed circuit board socket connectors is made of black UL 94V-0 PB. ###TE Connectivity Universal MATE-N-LOK ™ Series maximum rated current (A): | ------- | --- Suspended plug/socket | 15 printed circuit board plug | 12 rated voltage (Vac/dc) | 600 dielectric withstand voltage (kV) | 5 circuit to circuit (kV) | 10 insulation resistance (M Ω) | 1000 maximum contact resistance (m Ω) | 3.5 temperature range (° C) | -55 →+105 bonding times | 50 insulation material UL94V-2 | Natural polyamide insulation material UL94V-0 | White opaque nylon 6.6 contact material | Copper, tin plated contact material (vertical plug) | phosphor bronze, tin plated26621+$100.388110+$96.0234100+$95.2378250+$94.6267500+$93.66651000+$93.23002500+$92.61895000+$92.0952 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK printed circuit board socket connector TE Connectivity Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket designed to perform the latest glow wire test (GWT) requirements according to IEC 60335-1 and meet UL 94 V-0 requirements. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that require compliance with IEC 60335-1 and UL 94 V-0 standards. The typical applications of these universal MATE-N-LOK hot wire sockets include household appliances, desktop computers, HVAC equipment, lighting systems, security systems, industrial control, storage, and network systems. ###TE Connectivity Universal MATE-N-LOK ™ Ser91905+$3.998725+$3.702550+$3.4952100+$3.4063500+$3.34712500+$3.27305000+$3.243410000+$3.1990 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK printed circuit board socket connector TE Connectivity Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket connector Universal MATE-N-LOK printed circuit board socket designed to perform the latest glow wire test (GWT) requirements according to IEC 60335-1 and meet UL 94 V-0 requirements. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that require compliance with IEC 60335-1 and UL 94 V-0 standards. The typical applications of these universal MATE-N-LOK hot wire sockets include household appliances, desktop computers, HVAC equipment, lighting systems, security systems, industrial control, storage, and network systems. ###TE Connectivity Universal MATE-N-LOK ™ Ser563310+$9.7236100+$9.2374500+$8.91331000+$8.89712000+$8.83235000+$8.75127500+$8.686410000+$8.6540 -
![]()
Category: insertion pinDescription: TE Connectivity 符合灼热丝标准的通用 MATE-N-LOK 印刷电路板管座连接器 TE Connectivity 符合灼热丝标准的通用 MATE-N-LOK 印刷电路板管座连接器 通用 MATE-N-LOK 印刷电路板管座，设计用于根据 IEC 60335-1 执行最新灼热丝测试 (GWT) 要求，并达到 UL 94 V-0 的要求。 这些通用 MATE-N-LOK 印刷电路板管座具有 6.35mm 节距，且采用经过专门设计且具有高易燃性等级的灼热丝兼容材料制成。 这些通用 MATE-N-LOK 管座上的正向锁定闩锁可提供牢固配接，并防止高振动或冲击造成的意外拔出。 该管座经过极化，可防止错配，蛋笼设计可提高安全性。 这些符合灼热丝标准的通用 MATE-N-LOK 管座具有引脚或插座触点，可与符合灼热丝标准的通用 MATE-N-LOK 连接器外壳配接。 以下管座具有引脚触点：库存号 124-3471、124-3473、124-3474、124-3477、124-3478、124-3481、124-3482、124-3485、124-3486、124-3487、124-3491、124-3493、124-3496 以下管座具有插座触点：库存号 124-3475、124-3476、124-3479、124-3480、124-3483、124-3484、124-3489、124-3490、124-3492、124-3495、124-3497 ### 特点和优势 灼热丝符合 IEC 60335-1 标准 符合 UL 94 V-0 要求 坚固且高度可靠 极佳的电气性能 正向锁定闩锁，用于牢固配接 极化外壳可防止错配 手指保护蛋笼设计 提供引脚或插座触点 ### 应用 这些灼热丝通用 MATE-N-LOK 印刷电路板管座适用于需要达到 IEC 60335-1 和 UL 94 V-0 标准的应用。 这些灼热丝通用 MATE-N-LOK 管座的典型应用包括：家用电器、台式计算机、HVAC 设备、照明系统、安全系统、工业控制、存储和网络系统。 ### TE Connectivity 通用 MATE-N-LOK™ 系列 最大额定电流 (A)： | ---|--- 悬空插头/插座 | 15 印刷电路板插头 | 12 额定电压 (Vac/dc) | 600 介电耐压 (kV) | 5 电路间 (kV) | 10 绝缘电阻 (MΩ) | 1000 最大触点电阻 (mΩ) | 3.5 温度范围 (°C) | -55 → +105 接合次数 | 50 绝缘材料 UL94V-2 | 天然聚酰胺 绝缘材料 UL94V-0 | 白色不透明尼龙 6.6 触点材料 | 铜，镀锡 触点材料（垂直插头） | 磷青铜，镀锡2322 -
![]()
Category: insertion pinDescription: TE Connectivity 符合灼热丝标准的通用 MATE-N-LOK 印刷电路板管座连接器 TE Connectivity 符合灼热丝标准的通用 MATE-N-LOK 印刷电路板管座连接器 通用 MATE-N-LOK 印刷电路板管座，设计用于根据 IEC 60335-1 执行最新灼热丝测试 (GWT) 要求，并达到 UL 94 V-0 的要求。 这些通用 MATE-N-LOK 印刷电路板管座具有 6.35mm 节距，且采用经过专门设计且具有高易燃性等级的灼热丝兼容材料制成。 这些通用 MATE-N-LOK 管座上的正向锁定闩锁可提供牢固配接，并防止高振动或冲击造成的意外拔出。 该管座经过极化，可防止错配，蛋笼设计可提高安全性。 这些符合灼热丝标准的通用 MATE-N-LOK 管座具有引脚或插座触点，可与符合灼热丝标准的通用 MATE-N-LOK 连接器外壳配接。 以下管座具有引脚触点：库存号 124-3471、124-3473、124-3474、124-3477、124-3478、124-3481、124-3482、124-3485、124-3486、124-3487、124-3491、124-3493、124-3496 以下管座具有插座触点：库存号 124-3475、124-3476、124-3479、124-3480、124-3483、124-3484、124-3489、124-3490、124-3492、124-3495、124-3497 ### 特点和优势 灼热丝符合 IEC 60335-1 标准 符合 UL 94 V-0 要求 坚固且高度可靠 极佳的电气性能 正向锁定闩锁，用于牢固配接 极化外壳可防止错配 手指保护蛋笼设计 提供引脚或插座触点 ### 应用 这些灼热丝通用 MATE-N-LOK 印刷电路板管座适用于需要达到 IEC 60335-1 和 UL 94 V-0 标准的应用。 这些灼热丝通用 MATE-N-LOK 管座的典型应用包括：家用电器、台式计算机、HVAC 设备、照明系统、安全系统、工业控制、存储和网络系统。 ### TE Connectivity 通用 MATE-N-LOK™ 系列 最大额定电流 (A)： | ---|--- 悬空插头/插座 | 15 印刷电路板插头 | 12 额定电压 (Vac/dc) | 600 介电耐压 (kV) | 5 电路间 (kV) | 10 绝缘电阻 (MΩ) | 1000 最大触点电阻 (mΩ) | 3.5 温度范围 (°C) | -55 → +105 接合次数 | 50 绝缘材料 UL94V-2 | 天然聚酰胺 绝缘材料 UL94V-0 | 白色不透明尼龙 6.6 触点材料 | 铜，镀锡 触点材料（垂直插头） | 磷青铜，镀锡7389 -
![]()
Category: insertion pinDescription: TE Connectivity 符合灼热丝标准的通用 MATE-N-LOK 印刷电路板管座连接器 TE Connectivity 符合灼热丝标准的通用 MATE-N-LOK 印刷电路板管座连接器 通用 MATE-N-LOK 印刷电路板管座，设计用于根据 IEC 60335-1 执行最新灼热丝测试 (GWT) 要求，并达到 UL 94 V-0 的要求。 这些通用 MATE-N-LOK 印刷电路板管座具有 6.35mm 节距，且采用经过专门设计且具有高易燃性等级的灼热丝兼容材料制成。 这些通用 MATE-N-LOK 管座上的正向锁定闩锁可提供牢固配接，并防止高振动或冲击造成的意外拔出。 该管座经过极化，可防止错配，蛋笼设计可提高安全性。 这些符合灼热丝标准的通用 MATE-N-LOK 管座具有引脚或插座触点，可与符合灼热丝标准的通用 MATE-N-LOK 连接器外壳配接。 以下管座具有引脚触点：库存号 124-3471、124-3473、124-3474、124-3477、124-3478、124-3481、124-3482、124-3485、124-3486、124-3487、124-3491、124-3493、124-3496 以下管座具有插座触点：库存号 124-3475、124-3476、124-3479、124-3480、124-3483、124-3484、124-3489、124-3490、124-3492、124-3495、124-3497 ### 特点和优势 灼热丝符合 IEC 60335-1 标准 符合 UL 94 V-0 要求 坚固且高度可靠 极佳的电气性能 正向锁定闩锁，用于牢固配接 极化外壳可防止错配 手指保护蛋笼设计 提供引脚或插座触点 ### 应用 这些灼热丝通用 MATE-N-LOK 印刷电路板管座适用于需要达到 IEC 60335-1 和 UL 94 V-0 标准的应用。 这些灼热丝通用 MATE-N-LOK 管座的典型应用包括：家用电器、台式计算机、HVAC 设备、照明系统、安全系统、工业控制、存储和网络系统。 ### TE Connectivity 通用 MATE-N-LOK™ 系列 最大额定电流 (A)： | ---|--- 悬空插头/插座 | 15 印刷电路板插头 | 12 额定电压 (Vac/dc) | 600 介电耐压 (kV) | 5 电路间 (kV) | 10 绝缘电阻 (MΩ) | 1000 最大触点电阻 (mΩ) | 3.5 温度范围 (°C) | -55 → +105 接合次数 | 50 绝缘材料 UL94V-2 | 天然聚酰胺 绝缘材料 UL94V-0 | 白色不透明尼龙 6.6 触点材料 | 铜，镀锡 触点材料（垂直插头） | 磷青铜，镀锡2442 -
![]()
Category: insertion pinDescription: TE Connectivity Universal MATE-N-LOK Printed Circuit Board Socket Connector TE Connectivity Universal MATE-N-LOK Printed Circuit Board Socket Connector Universal MATE-N-LOK Printed Circuit Board Socket Connector Universal MATE-N-LOK Printed Circuit Board Socket Connector Universal MATE-N-LOK Printed Circuit Board Socket Connector Universal MATE-N-LOK Printed Circuit Board Socket Connector Universal MATE-N-LOK Printed Circuit Board Socket Connector Universal MATE-N-LOK Printed Circuit Board Socket Connector Universal MATE-N-N-LOK Printed Circuit Board Socket Connector Universal MATE-N-LOK Printed Circuit Board Socket Connector Universal MATE-N-LOK Printed Circuit Board Socket Connector Universal MATE-. These universal MATE-N-LOK printed circuit board sockets have a pitch of 6.35mm and are made of specially designed and highly flammable hot wire compatible materials. The forward locking latches on these universal MATE-N-LOK sockets provide a secure fit and prevent accidental pull-out caused by high vibration or impact. The tube seat is polarized to prevent mismatches, and the egg cage design can improve safety. These universal MATE-N-LOK sockets that comply with the hot wire standard have pin or socket contacts that can be paired with universal MATE-N-LOK connector housings that comply with the hot wire standard. The following sockets have pin contacts: Stock numbers 124-3471, 124-3473, 124-3474, 124-3477, 124-3478, 124-3481, 124-3482, 124-3485, 124-3486, 124-3487, 124-3491, 124-3493, 124-3496. The following sockets have socket contacts: Stock numbers 124-3475, 124-3476, 124-3479, 124-3480, 124-3483, 124-3484, 124-3489, 124-3490, 124-3492, 124-3495, 124-3497. The hot wire complies with IEC 60335-1. The standard meets the requirements of UL 94 V-0. The sturdy and highly reliable forward locking latch is used to firmly connect the polarized shell and prevent mismatches. The egg cage design provides pin or socket contacts. These universal MATE-N-LOK printed circuit board sockets are suitable for applications that requ474210+$11.3880100+$10.8186500+$10.43901000+$10.42002000+$10.34415000+$10.24927500+$10.173310000+$10.1353
